This portable, user – friendly monitor includes crucial features and functions to ensure top quality patient care. The ability to monitor your patient’s blood pressure, heart rate, pulse rate and SpO2 (oxygen level in blood) has never been easier to do on the run in the ambulance, the operating room, and anywhere in-between. In case of a power outage, the monitor is well prepared, and includes an internal battery that can run for a minimum of a quarter hour.
Datex Ohmeda Cardiocap 5 Features
- A colored screen with adjustable brightness, and a built-in printer for your convenience
- An easy-to-use interface on a large screen with color-coded, prioritized alarms which allow for customizable modes for specific care situations
- Full Vital Signs Monitoring Capabilities: Body Pressure, Blood Pressure, Pulse Rate, Respiration Rate
- ECG – shows up to 6 waveforms, SpO2, NiBP, 2 X-Temp, NMT, 24-hour graphical trends of all parameters, also able to show minitrends in a 5 or 30 minute window
- An emergency backup battery with the potential to run for a quarter hour minimum in case of emergency (requires 5 hours charging time).
- A smaller sized unit that is mobile and requires less space than most vital signs monitors.
Potential Use(s):
- Operating Rooms
- Ambulatory Vehicles
- Surgery and Induction Rooms
- PACU (Post Anesthesia Care Units)
- Monitor is intended for use for patients over 11 lbs/ three years of age
Datex Ohmeda Cardiocap 5 Specifications
Dimensions
- Size: (W x D x H) 330 x 220 x 300 mm, (13.0 x 8.7 x 11.8 in)
- Weight: F-MXG: < 11.2 kg, (24.8 lb), F-MX: < 10.2 kg, (22.6 lb
Power
- 100-240 VAC ±10%, 60/50 Hz
Back-up battery
- 15 min minimum, charging time typically 5h
Graphical trends
- 20 min, 1, 2, 4, 6, 8, 10, 12 and 24h
Numerical trends
- All parameters, sampled every 5 min and after NIBP measurement
Alarms
- Adjustable high and low limit alarms
Recorder
- (optional) Thermal array, 3-channels, paper width 50 mm. Local printing PCL-5 and later compatible laser printers
Screen
- Display size and type 10.4 inch LCD active matrix colorNumber of traces Up to 6. Display resolution 640 x 480 pixels
ECG
- Number of channels 3
- Number of leads 3 or 5
- ST analysis 3 channels, continuous
Heart rate
- Measurement range 30 to 250 beats per min (bpm)
- Measurement accuracy ±5% or ±5 bpm, whichever is greater
- Pacemaker pulse detection 2 to 500 mV, 0.5 to 2 ms
Impedance Respiration
- Measurement method Measurement uses ECG electrodes to measure the impedance changes as a result of breathing. Measurement range 4 to 120 breaths/min
Pulse Oximetry (SpO2), Datex Legacy Standard
- Plethysmographic waveform/plethysmogram
- Measurement method Red and infrared light absorbtion SpO2
- Measurement range
- SpO2 40% to 100%
- Pulse rate 30 to 250 bpm
- Measurement accuracy, SpO2
- (±1SD) 100% to 80%, ±2 digits
- Below 50%, unspecified
- Pulse rate measurement accuracy ±5% or ±5 bpm
- Pulse Oximetry (SpO2), Datex Legacy Standard
